Reserve PRO
Reserve PRO
DESCRIPTION:
The Reserve Pro is the most advanced string and cable "reserving jig" on the market to date. Capable of accommodating any string or cable length from within the archery market. This tool is easy to set up and easy to use. Apply pressure to any string or cable up to 250lbs for a very tight serve. With this product, you can serve any part of your string or cable from one end to the other. The Reserve Pro will mount directly to your LCA bow press or straight to your workbench. Do you need to reserve your string or cable? Purchase the Reserve Pro and repair your string or cable instead of paying the high price to replace them.
FEATURES:
• Capable of reserving any string or cable on the market
• Applies pressure to your string or cable up to 250lbs.
• Easy to setup and easy to use
• Mounts directly to your LCA bow press or to your work bench
MOUNTING OPTIONS:
This product has a Standard and an Ultimate version.
The explanation below details the differences between the two available options.
Standard version attaches to:
EZ Green, EZ Press, and EZ Press Deluxe. Power Green, Power Press, and Power Press Deluxe
Ultimate version attaches to:
Ultimate EZ Press and the Ultimate Deluxe Press
Each bracket will be equipped with space filler to ensure a perfect fit inside each bow press arm. Your bracket will already have the space filler installed and ready to go when you receive the product.
If your press is older than 2009, contact LCA before purchase.
MOUNTING DIAGRAM:
TOOLS NEEDED:
7/16” wrench, socket, or nut driver for a drill.
ITEMS INCLUDED:
Reserve PRO unit, with the bracket already installed | 2 - Lag Bolts | 2 - Washers | 2 - Ring pins (for locking the wheels) | 2 - Dowel pins (for holding the string or cable loops).
Review the above diagram before installing your Reserve PRO to your table. Following this diagram will ensure that your Reserve is far enough out from your table so the handle can be turned. Always ensure you tighten the lag bolts snug, but don’t over tighten them because the bolt head can / will snap off leaving the bolts threads inside your table. Once you have your measurements made, mount your Reserve PRO using your lag bolts and provided washers.
