MINI Xbow Adapter
$164.00
The MINI Xbow Adapter allows any LCA crossbow-compatible bow press to accommodate ultra-compact crossbows with axle-to-axle measurements under 11 inches. With its simple design, it enables the safe and effective pressing of crossbows that are as short as 4 inches axle-to-axle.
Lead Time: 3 week(s)
- Compatible with all LCA bow presses designed for crossbows
- Presses crossbows as narrow as 4″ axle-to-axle
- Easy to install and use for compact crossbow models
- 1 qty. MINI Xbow Adapter
- 2 qty. Steel Mounting Pins
- This adapter is designed for use with LCA presses that are compatible with crossbows.
- This adapter is compatible only with the EZ Green Crossbow Press and any LCA press with “Ultimate” in its name. These specific presses are built crossbow-compatible.
- The adapter does NOT include fingers; you will need to use the fingers that come standard with your LCA bow press. Additionally, this adapter is not compatible with Pack-N-Go press models. If you would like a MINI Xbow Adapter for your Pack-N-Go crossbow/ultimate presses, you will need our MINI Xbow Adapter – PNG.
Every tool we produce is designed to be tough by intention. From thick-walled materials to reinforced frames and stress-tested components, our tools are designed for rigorous use in demanding conditions. We don’t just expect ruggedness—we engineer it into every detail. The MINI Xbow Adapter has been engineered for extreme strength to help withstand the high pressures of today’s crossbows.
American Made
The MINI Xbow Adapter is proudly manufactured in our facility located in the state of Georgia, USA.
Hand-Assembled Craftsmanship
The MINI Xbow Adapter is built by real hands, with real pride. Our hand-assembled process guarantees unmatched attention to detail and quality.
Robotic Precision Welded
Every weld on each MINI Xbow Adapter is executed with robotic precision, ensuring unmatched consistency, strength, and a flawless finish every single time.
Built to Last
The MINI Xbow Adapter is crafted from premium materials and features precision craftsmanship. Our products are engineered to withstand years of rigorous use—no shortcuts, no compromises.
1. Product Overview
The Mini Crossbow Adapter allows you to safely press today’s ultra-narrow axle-to-axle crossbows.
-
Compatible With:
-
EZ Green Crossbow Press
-
Power Ultimate / Power Ultimate Deluxe
-
Ultimate EZ / Ultimate EZ Deluxe
-
Pack-N-Go Ultimate & Crossbow models (⚠️ adapter does not install on Pack-N-Go)
-
-
Function:
-
Reduces minimum press width from 11 inches down to 4 inches.
-
Enables safe pressing of narrow crossbows such as Ravin, TenPoint, and other sub-11” models.
-
⚠️ Important: Only use with Last Chance Archery presses that are crossbow-compatible. Do not use on standard compound-only presses — they are not built to withstand crossbow draw weights.
2. What’s in the Package
-
Mini Crossbow Adapter (with spring steel block)
-
2 Quick-release pins
-
(No new fingers are included — you will reuse two fingers from your press)
3. Installation Instructions
Step 1: Remove Standard Fingers
-
Take off the two fingers from one side of your bow press.
-
These will be reused on the adapter.
Step 2: Prepare the Adapter
-
Ensure you have the adapter body and both quick-release pins.
-
Remove the pins from the adapter before installation.
Step 3: Install the Adapter
-
Slide the mini crossbow adapter onto the press arm.
-
Make sure the steel block of the adapter rests firmly against the press arm.
-
Reinsert both quick-release pins securely.
-
⚠️ Do not use the adapter unless both pins are fully in place.
-
Step 4: Reinstall Fingers
-
Slide the two bow press fingers you removed earlier onto the adapter.
-
Adjust their width and angle as needed to fit your crossbow limbs.
4. Using the Adapter
-
With the adapter installed, your press now accommodates crossbows as narrow as 4 inches axle-to-axle.
-
Insert the crossbow into the fingers as you normally would, making sure to:
-
Adjust finger spacing correctly.
-
Keep equal pressure on both limbs.
-
Avoid torque or twisting on the riser or limbs.
-
5. Notes on Height Differences
-
Copper-colored LCA presses use a machined aluminum block.
-
EZ Green Crossbow presses use a welded block that sits slightly lower.
-
Result: With the Mini Crossbow Adapter, your bow may tilt slightly one way or another depending on press model.
-
✅ This is normal and safe — it does not affect pressing function.
6. Installation on Deluxe Presses
For Ultimate EZ Deluxe or Power Ultimate Deluxe models:
-
Slide the adapter between the two mounting bolts where the press meets the pivot.
-
Push adapter toward the handwheel until seated against the back bolt.
-
Insert quick-release pins as normal.
-
If fit is tight due to powder coat:
-
Loosen the two pivot bolts with a 9/16” wrench.
-
Slide adapter into place.
-
Re-tighten bolts to lock securely.
-
7. Safety Warnings
-
Only use with LCA crossbow-compatible presses.
-
Ensure both quick-release pins are locked before pressing.
-
Always adjust finger placement to evenly press the limbs.
-
Do not attempt to use the adapter with missing or damaged parts — contact LCA for replacements.
Videos
MINI Xbow Adapter + Instructional
Join LCA’s Jonathan Clark as he demonstrates how to set up and use the MINI Xbow Adapter.
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 8 × 9 × 3.75 in |
| Product Lead Time (Wks) | 3 |
5 reviews for MINI Xbow Adapter
- 3” Block Kit for Additional Finger Width Adjustment
- Internal Filler Strips for a Snug Fit
Additional information
| Weight | 5 lbs |
|---|---|
| Dimensions | 8 × 9 × 3.75 in |
| Product Lead Time (Wks) | 3 |
5 reviews for MINI Xbow Adapter
-
Mini Xbow Adapter – Expand your customer base
Expand your customer base by adding the Mini Xbow adapter to your press arsenal. It allows you to press the highly popular narrower (shorter ATA) crossbows, this increasing the number of bows that you can press and safely work on. Great Product guys, as we have come to expect.
-
Xbow adapter
Very well made and durable. Gets the job done and you can work confidently. Very simple set up and take down when not in use. I can now work on anything that comes through my door. Love it!
-
Works great well worth the money!
Great addition to my bow press
-
Perfect Addition!!!
Like all things Last Chance Archery, the mini crossbow adapter is no exception to the rule. It works flawlessly. I’ve used it countless times at the shop I work at and now that I’m starting my own thing, I had to have it!!
-
Mini Xbow Adapter
Product works great on my Ravin crossbow.
You may also like…
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
MINI Xbow Adapter - PNG
ReachIt Wrench
Pocket Shop
Ready Blade
Double Bright
Daniel Salmons –
Mini Xbow Adapter – Expand your customer base
Expand your customer base by adding the Mini Xbow adapter to your press arsenal. It allows you to press the highly popular narrower (shorter ATA) crossbows, this increasing the number of bows that you can press and safely work on. Great Product guys, as we have come to expect.
Native Precision –
Xbow adapter
Very well made and durable. Gets the job done and you can work confidently. Very simple set up and take down when not in use. I can now work on anything that comes through my door. Love it!
Michael Walker –
Works great well worth the money!
Great addition to my bow press
michael pantle –
Perfect Addition!!!
Like all things Last Chance Archery, the mini crossbow adapter is no exception to the rule. It works flawlessly. I’ve used it countless times at the shop I work at and now that I’m starting my own thing, I had to have it!!
Michael Mace –
Mini Xbow Adapter
Product works great on my Ravin crossbow.