MINI Xbow Adapter – PNG

$175.00

The MINI Xbow Adapter – PNG enables the Pack-N-Go Ultimate and Crossbow presses to accommodate ultra-compact crossbows with axle-to-axle measurements of 11 inches or less. With its simple design, it allows the safe and effective pressing of crossbows that are as short as 4 inches axle-to-axle.

Lead Time: 3 week(s)

Features

What's Included

Compatibility

Every tool we produce is designed to be tough by intention. From thick-walled materials to reinforced frames and stress-tested components, our tools are designed for rigorous use in demanding conditions. We don’t just expect ruggedness—we engineer it into every detail. The MINI Xbow Adapter – PNG has been engineered for extreme strength to help withstand the high pressures of today’s crossbows.

American Made

The MINI Xbow Adapter - PNG is proudly manufactured in our facility located in the state of Georgia, USA.

Hand-Assembled Craftsmanship

The MINI Xbow Adapter - PNG is built by real hands, with real pride. Our hand-assembled process guarantees unmatched attention to detail and quality.

Robotic Precision Welded

Every weld on each MINI Xbow Adapter - PNG is executed with robotic precision, ensuring unmatched consistency, strength, and a flawless finish every single time.

Built to Last

The MINI Xbow Adapter - PNG is crafted from premium materials and features precision craftsmanship. Our products are engineered to withstand years of rigorous use—no shortcuts, no compromises.

1. Product Overview

The Mini Crossbow Adapter allows you to safely press today’s ultra-narrow axle-to-axle crossbows.

Compatible With:
- EZ Green Crossbow Press
- Power Ultimate / Power Ultimate Deluxe
- Ultimate EZ / Ultimate EZ Deluxe
- Pack-N-Go Ultimate & Crossbow models (⚠️ adapter does not install on Pack-N-Go)
Function:
- Reduces minimum press width from 11 inches down to 4 inches.
- Enables safe pressing of narrow crossbows such as Ravin, TenPoint, and other sub-11” models.

⚠️ Important: Only use with Last Chance Archery presses that are crossbow-compatible. Do not use on standard compound-only presses — they are not built to withstand crossbow draw weights.

2. What’s in the Package

Mini Crossbow Adapter (with spring steel block)
2 Quick-release pins
(No new fingers are included — you will reuse two fingers from your press)

3. Installation Instructions

Step 1: Remove Standard Fingers

Take off the two fingers from one side of your bow press.
These will be reused on the adapter.

Step 2: Prepare the Adapter

Ensure you have the adapter body and both quick-release pins.
Remove the pins from the adapter before installation.

Step 3: Install the Adapter

Slide the mini crossbow adapter onto the press arm.
Make sure the steel block of the adapter rests firmly against the press arm.
Reinsert both quick-release pins securely.
- ⚠️ Do not use the adapter unless both pins are fully in place.

Step 4: Reinstall Fingers

Slide the two bow press fingers you removed earlier onto the adapter.
Adjust their width and angle as needed to fit your crossbow limbs.

4. Using the Adapter

With the adapter installed, your press now accommodates crossbows as narrow as 4 inches axle-to-axle.
Insert the crossbow into the fingers as you normally would, making sure to:
- Adjust finger spacing correctly.
- Keep equal pressure on both limbs.
- Avoid torque or twisting on the riser or limbs.

5. Notes on Height Differences

Copper-colored LCA presses use a machined aluminum block.
EZ Green Crossbow presses use a welded block that sits slightly lower.
Result: With the Mini Crossbow Adapter, your bow may tilt slightly one way or another depending on press model.
✅ This is normal and safe — it does not affect pressing function.

6. Installation on Deluxe Presses

For Ultimate EZ Deluxe or Power Ultimate Deluxe models:

Slide the adapter between the two mounting bolts where the press meets the pivot.
Push adapter toward the handwheel until seated against the back bolt.
Insert quick-release pins as normal.
If fit is tight due to powder coat:
- Loosen the two pivot bolts with a 9/16” wrench.
- Slide adapter into place.
- Re-tighten bolts to lock securely.

7. Safety Warnings

Only use with LCA crossbow-compatible presses.
Ensure both quick-release pins are locked before pressing.
Always adjust finger placement to evenly press the limbs.
Do not attempt to use the adapter with missing or damaged parts — contact LCA for replacements.