Multi-Angle Stabilizer Mount
$65.00
The Multi-Angle is a quick disconnect front stabilizer mount that adjusts from 0 to 20 degrees in 5-degree increments. No extra parts or pieces are required to change the mount to different angles; loosen a bolt, adjust the mount to your desired setting, and then lock it back into place on your bow. One mount, 5 different angle positions.
Out of stock
Lead Time: 1 week(s)
- Marked settings: 0º, 5º, 10º, 15º, 20º
- Strong and durable design
- Quick and easy adjustment between any angle setting
- Multiple angle options with one mount, no extra pieces needed
- 1 qty. Multi-Angle
- 1 qty. Mounting Bolt
- Fits most compound and recurve bows.
At LCA, we never cut corners—because precision archery demands perfection at every step. From raw materials to final assembly, every process is closely monitored, refined, and held to the strictest quality control standards. Our zero-compromise manufacturing philosophy ensures you receive tools that deliver exceptional performance every time. The Multi-Angle is manufactured under these same guidelines.
American Made
This product is proudly manufactured in our facility located in the state of Georgia, USA.
Trust by professionals
Professional hunters and tournament archers worldwide trust LCA products to help create their most accurate setups. The Multi-Angle is one such product.
Hand-Assembled Craftsmanship
The Multi-Angle, built by real hands, with real pride. Our hand-assembled process guarantees unmatched attention to detail and quality.
Product Support
Questions? We’ve got answers. Our product support team is ready to help with guides, tips, and real solutions. If you have any questions about the Multi-Angle, don’t hesitate to let our team know.
1. Product Overview
The Multi-Angle Stabilizer Mount is a revolutionary stabilizer accessory that allows you to set your front stabilizer at multiple angles for maximum control and balance.
-
Adjustable Angles: 0° to 20° in 5° increments
-
Quick Setup: Only five mounting pieces
-
Pro Adjustment: Can be rotated to maintain left-right balance when shooting at steep angles
This mount helps you optimize bow balance whether you’re shooting on level ground, uphill, or downhill.
2. What’s in the Package
-
Mounting bolt
-
Special angle washer
-
Angle adjustment plate (with degree markings)
-
Alignment tab with riser marks
-
Standard stabilizer quick-connect mount
3. Mounting the Stabilizer Bracket
-
Prepare the Bolt & Washer
-
Insert the special washer onto the mounting bolt.
-
The washer helps seat the mount at your chosen angle.
-
-
Assemble the Mount
-
Drop the mounting bolt through the stabilizer receiver.
-
Place the angle adjustment plate against the bow riser.
-
Use the alignment groove to ensure markings line up correctly.
-
-
Install on the Bow
-
Thread the mounting bolt into the bow’s stabilizer bushing.
-
Align the 0° mark with the riser alignment hash for a straight mount.
-
Snug the bolt firmly with an Allen wrench.
-
-
Attach Stabilizer
-
Insert your stabilizer (or quick disconnect) into the mount as usual.
-
At 0°, your stabilizer will be perfectly straight.
-
4. Adjusting the Angle
-
Loosen the Mount slightly to allow adjustment.
-
Align the Angle Mark on the cup (5°, 10°, 15°, or 20°) with the alignment tab.
-
Check Riser Alignment Marks to ensure your chosen degree is vertical.
-
Tighten Bolt Securely.
Your stabilizer will now hold the new down angle.
Videos
Multi Angle + Instructional
Join us as George Ryals IV demonstrates not only how to install and use the LCA Multi-Angle, but also how to use an angled mount to help eliminate left and right shots when shooting higher more extreme angles.
BUY NOW: https://lastchancearchery.com/shop-1/multi-angle
Additional information
| Weight | 0.625 lbs |
|---|---|
| Dimensions | 4.75 × 1.16666666666667 × 7.25 in |
| Product Lead Time (Wks) | 1 |
1 review for Multi-Angle Stabilizer Mount
- 5/16-24 Threaded QD Nut
- 5/16-24 Mounting Bolt
Additional information
| Weight | 0.625 lbs |
|---|---|
| Dimensions | 4.75 × 1.16666666666667 × 7.25 in |
| Product Lead Time (Wks) | 1 |
1 review for Multi-Angle Stabilizer Mount
-
Versatile, stabilizer angles
I end up getting one of these at the beginning of the year put it on my target bow for my Matthews. I absolutely love the ability to change the angles of my front bar Effortless definitely a 10 out of 10
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
0.5 oz Stabilizer Weight (5/16-24 Thread Fit)
1 oz Stabilizer Weight (5/16-24 Thread Fit)
3 oz Tungsten Stabilizer Weight - (5/16-24 Thread Fit)
3 oz Tungsten Stabilizer Weight - (1/4-20 Thread Fit)
Pocket Shop
ReachIt Wrench
Travis Woods –
Versatile, stabilizer angles
I end up getting one of these at the beginning of the year put it on my target bow for my Matthews. I absolutely love the ability to change the angles of my front bar Effortless definitely a 10 out of 10