1 oz Stabilizer Weight (5/16-24 Thread Fit)
$8.00
Are you using our 3 oz tungsten weights and looking to fine-tune your setup? Our 1 oz black stabilizer weights are perfect for this purpose. With the same non-threaded design as our tungsten weights, they easily slide onto your threaded stud alongside any other weight configurations.
Lead Time: 1 week(s)
- Flat black, scratch-resistant coating
- Small and dense design
- Pair with LCA Tungsten to cut your weight stack in length.
- Better center of gravity for your weight
- A shorter weight stack provides less wind drag.
- Non-threaded, so the weights slide onto your stud easily and don’t stick together.
- 1 qty.
- 1 oz Stabilizer Weight (5/16-24 Thread Fit)
- Thread Fit: 5/16-24
NOTE: The weights are non-threaded, so a weight cap and stud are required. You can also use your rubber stabilizer dampener as a cap on your front or sidebar to secure the weights to your threaded stud. Get yours today!
LCA Stabilizer Weights are second to none. Featuring a non-threaded design, you can easily interchange your weights without hassle. Choose your cap and stud, slide on the weight, and install it onto your stabilizers; you’re ready to go. Cutting your weight stack by 2/3 in overall length has many advantages that help increase your accuracy in the field. Mix and match between LCA 3 oz Tungsten, 1 oz Stainless Steel, and 0.5 oz Stainless Steel for peak performance.
Long-Lasting Finish
Each weight has a durable, scratch-resistant black finish.
Strong & Durable Materials
Built like a tank to withstand the elements while in the field.
Built with Purpose
The LCA Stabilizer Weight system is built with a specific purpose in mind, to make things easier for the archer.
Industry-Leading Accuracy
Using LCA products can result in industry-leading accuracy. LCA Stabilizer Weights can be used by hunters, tournament archers, or recreational shooters.
1 oz Stabilizer Weight (5/16-24 Thread Fit)
Setup & Use Instructions
Select a compatible LCA Cap + Stud Pack with a 5/16-24 thread fit.
Ensure the stabilizer rod, stud, cap, and weights are clean and free of debris.
Thread the stud fully into the cap until it is completely seated and secure.
Verify the stud is screwed all the way into the cap before adding weights to prevent thread damage or stripping.
Choose your desired weight configuration using LCA 3 oz tungsten, 1 oz stainless steel, and 0.5 oz stainless steel weights to fine-tune balance.
Slide the 1 oz stabilizer weight onto the stud using its non-threaded center hole.
Add additional weights as needed, stacking them flush and evenly on the stud.
Confirm the weights sit flat against each other and do not bind or stick together.
Install a cap or rubber stabilizer dampener onto the end of the stud to retain the weight stack.
Thread the complete Cap + Stud and weight stack into the stabilizer rod by hand.
Tighten the assembly until snug so the weights are secure and cannot move during shooting.
Avoid over-tightening to protect threads and components.
Check that the weight stack is straight, compact, and does not wobble.
Adjust balance as needed by removing the assembly and changing weight combinations.
Reinstall the assembly once balance is finalized.
Inspect the setup periodically to ensure the cap, stud, and weights remain tight during use.
Remove and store components in a clean, dry location when not in use.
Additional information
| Weight | 0.0125 lbs |
|---|---|
| Dimensions | 3.25 × 0.428571428571429 × 5.5 in |
| Product Lead Time (Wks) | 1 |
1 review for 1 oz Stabilizer Weight (5/16-24 Thread Fit)
- Weight: 1 oz
- Thread Fit: 5/16-24
- Diameter: 1.40″
- Color: Black
- Material: Stainless Steel
- Each weight is non-threaded.
Additional information
| Weight | 0.0125 lbs |
|---|---|
| Dimensions | 3.25 × 0.428571428571429 × 5.5 in |
| Product Lead Time (Wks) | 1 |
- Warranty Period
- 30 Days
- Coverage
- Manufacturing Defects Only
1 review for 1 oz Stabilizer Weight (5/16-24 Thread Fit)
-
Good product
The weights work as expected. I like that they slip on and off without being threaded and have a slim profile.
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
0.5 oz Stabilizer Weight (5/16-24 Thread Fit)
(5/16) Cap + Stud Packs
3 oz Tungsten Stabilizer Weight - (5/16-24 Thread Fit)
Dan D –
Good product
The weights work as expected. I like that they slip on and off without being threaded and have a slim profile.