3 oz Tungsten Stabilizer Weight – (5/16-24 Thread Fit)
$34.00
Would you like to reduce your stabilizer weight stack by nearly two-thirds? With LCA Tungsten stabilizer weights, you can achieve just that! These weights are the same size as a standard 1 oz stainless steel weight, but when you weigh them, they impressively weigh 3 oz each.
Using these weights allows you to shorten the overall length of your weight stack, reducing wind drag and preventing the weights from hitting your side. This system achieves a higher weight in a more compact form, making it ideal for shooters with maximum stabilizer length restrictions in their class.
The LCA Tungsten weights are non-threaded, allowing them to slide onto your stud easily. They won’t stick together, and you can use one stud for up to 36 oz of weight without needing multiple threaded studs. LCA Tungsten is unparalleled in quality and now features an all-new flat black scratch-resistant coating.
Please note that the weights are non-threaded, so a weight cap and stud are required. You can also use your rubber stabilizer dampener as a cap on your front or sidebar to secure your weight onto your threaded stud.
Lead Time: 1 week(s)
- Flat black, scratch-resistant coating
- Small and dense design
- Reduces your weight stack by nearly two-thirds
- Better center of gravity for your weight
- A shorter weight stack provides less wind drag.
- The non-threaded design allows for easy slide-on application, and one stud can accommodate up to 36 oz of weight without needing multiple studs.
- 1 qty.
- 3 oz Tungsten Stabilizer Weight (5/16-24 Thread Fit)
- Thread Fit: 5/16-24
LCA Stabilizer Weights are second to none. Featuring a non-threaded design, you can easily interchange your weights without hassle. Choose your cap and stud, slide on the weight, install it onto your stabilizers, and you’re ready to go. Cutting your weight stack by 2/3 in overall length has many advantages that help increase your accuracy in the field. Mix and match between LCA 3 oz Tungsten, 1 oz Stainless Steel, and 0.5 oz Stainless Steel for peak performance.
Archery Innovation
Innovation isn't just part of what we do—it defines it. We're redefining the standard for precision in modern archery.
Trusted by Professionals
Professional hunters and tournament archers worldwide trust LCA products to help create their most accurate setups.
Rugged by Design
Built for hard use and harsh conditions, our products are engineered with purpose. Rugged isn’t a side effect—it’s the blueprint.
Long-Lasting Finish
This product uses a custom finish that is scratch-resistant and long-lasting.
3 oz Tungsten Stabilizer Weight (5/16-24 Thread Fit)
Setup & Use Instructions
Select a compatible LCA Cap + Stud Pack with a 5/16-24 thread fit.
Ensure the stabilizer rod, stud, cap, and weights are clean and free of debris.
Thread the stud fully into the cap until it is completely seated and secure.
Verify the stud is screwed all the way into the cap before adding weights to prevent thread damage or stripping.
Choose your desired weight configuration using LCA 3 oz tungsten, 1 oz stainless steel, and 0.5 oz stainless steel weights to fine-tune balance.
Slide the 3 oz tungsten weight onto the stud using its non-threaded center hole.
Add additional weights as needed, stacking them flush and evenly on the stud.
Confirm the weights sit flat against each other and do not bind or stick together.
Install a cap or rubber stabilizer dampener onto the end of the stud to retain the weight stack.
Thread the complete Cap + Stud and weight stack into the stabilizer rod by hand.
Tighten the assembly until snug so the weights are secure and cannot move during shooting.
Avoid over-tightening to protect threads and components.
Check that the weight stack is straight, compact, and does not wobble.
Adjust balance as needed by removing the assembly and changing weight combinations.
Reinstall the assembly once balance is finalized.
Inspect the setup periodically to ensure the cap, stud, and weights remain tight during use.
Remove and store components in a clean, dry location when not in use.
Additional information
| Weight | 0.17875 lbs |
|---|---|
| Dimensions | 5.5 × 3.25 × 0.5 in |
| Product Lead Time (Wks) | 1 |
1 review for 3 oz Tungsten Stabilizer Weight – (5/16-24 Thread Fit)
- Weight: 3 oz
- Thread Fit: 5/16-24
- Diameter: 1.40″
- Color: Black
- Material: Tungsten
- Each weight is non-threaded.
Additional information
| Weight | 0.17875 lbs |
|---|---|
| Dimensions | 5.5 × 3.25 × 0.5 in |
| Product Lead Time (Wks) | 1 |
1 review for 3 oz Tungsten Stabilizer Weight – (5/16-24 Thread Fit)
-
Good product
The weights work as expected. I like that they slip on and off without being threaded and have a slim profile.
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
0.5 oz Stabilizer Weight (5/16-24 Thread Fit)
1 oz Stabilizer Weight (5/16-24 Thread Fit)
(5/16) Cap + Stud Packs
ReachIt Wrench
Pocket Shop
Ready Blade
Precision Arrow Prep Kit - Handheld
Dan D –
Good product
The weights work as expected. I like that they slip on and off without being threaded and have a slim profile.