(1/4″) Cap + Stud Packs
$14.00
LCA Cap + Stud combinations hold your LCA Stabilizer Weights onto your stabilizers. All LCA weights are unthreaded, allowing for easy addition or removal. You will no longer have to worry about aligning stabilizer studs perfectly to hold your desired weight. Choose the appropriate stud length for your weight stack, slide the weights onto it, and install them onto your stabilizer rod. You’re done. Each pack features a stylish domed sticker, allowing you to represent the LCA brand wherever you go proudly. Easy, precise, dependable.
Lead Time: 1 week(s)
- High-Quality Threaded Stud
- Precision-Milled Cap
- Functions with non-threaded LCA Stabilizer Weights
- Custom domed end cap sticker
- Pending your chosen size:
- 1 qty. Cap + Stud Pack (¼-20 – 1”)
- 1 qty. Cap + Stud Pack (½-20 – 2″)
- 1 qty. Cap + Stud Pack (¼-20 – 3”)
- Thread Fit: ¼-20
LCA’s Stabilizer Weight system is second to none. Featuring a non-threaded design, you can easily interchange your weights without hassle. Choose your Cap and Stud, slide on the weight, and install it onto your stabilizers; you’re ready to go. Cutting your weight stack by 2/3 in overall length has many advantages that help increase your accuracy in the field. Mix and match between LCA 3 oz Tungsten, 1 oz Stainless Steel, and 0.5 oz Stainless Steel for peak performance. You can’t use LCA Stabilizer Weights without the appropriate Cap + Stud Pack. Check them out today!
Archery Innovation
Innovation isn't just part of what we do—it defines it. We're redefining the standard for precision in modern archery. The LCA Cap + Stud Pack is a highly innovative component that can be used with LCA's Stabilizer Weight System.
Made for the Outdoorsman
From the hunt to the range, the LCA Cap + Stud Pack is made to match the grit and precision of the outdoorsman who depends on every shot.
Trusted By Professionals
Professional hunters and tournament archers worldwide trust LCA products to help create their most accurate setups. The LCA Cap + Stud Pack is one of those products from LCA's Stabilizer Weight System.
Product Support
Questions? We've got answers. Our product support team is ready to help with guides, tips, and real solutions. If you need assistance with your LCA Cap + Stud Pack, please don't hesitate to contact our team.
LCA (1/4″) Cap + Stud Packs
Setup & Use Instructions
Select the correct Cap + Stud length based on the total number of stabilizer weights you plan to run.
Ensure the stabilizer rod threads and Cap + Stud threads are clean and free of debris.
Thread the stud fully into the cap until it is completely seated against the internal stop.
Verify the stud is screwed all the way into the cap, as incomplete installation may cause thread damage or stripping.
Choose your desired weight configuration using LCA 3 oz, or 0.5 oz stabilizer weights to fine-tune balance.
Slide the selected stabilizer weights onto the stud in your preferred order.
Confirm the weights sit flush and are fully supported by the stud.
Thread the assembled Cap + Stud and weight stack into the stabilizer rod by hand.
Tighten the assembly until snug so the weights are secure and cannot move.
Avoid over-tightening to prevent damage to threads or components.
Check that the weight stack is aligned straight and does not wobble.
Adjust balance as needed by removing the assembly and changing weight combinations.
Reinstall the Cap + Stud assembly once adjustments are complete.
Inspect the setup periodically to ensure the cap and stud remain tight during use.
When finished shooting, remove the assembly if needed and store components in a clean, dry location.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | N/A |
| Product Lead Time (Wks) | 1 |
| Length | 1", 2", 3" |
- Each 1″ stud can hold up to 6 oz of weight.
- Each 2″ stud can hold up to 21 oz of weight.
- Each 3″ stud can hold up to 36 oz of weight.
- Thread Fit: ¼ – 20
- Cap Color: Black
- Cap Diameter: 1.40”
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | N/A |
| Product Lead Time (Wks) | 1 |
| Length | 1", 2", 3" |
- Warranty Period
- 30 Days
- Coverage
- Manufacturing Defects Only
Reviews
There are no reviews yet.
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
(1/4") Cap + Stud Packs
0.5 oz Stabilizer Weight (1/4-20 Thread Fit)
Reviews
There are no reviews yet.