Power Green Crossbow Press

From: $699.00

Rated 5.00 out of 5 based on 1 customer rating

The Power Green Crossbow press is designed for both individual consumers and pro shops, making it ideal for pressing most crossbows available today, as well as shorter axle-to-axle compound bows. It is user-friendly and suitable for both home and professional use. Each LCA press model has a patented finger system that allows you to press your bow as if it is being drawn back. This design ensures that no extra pressure is applied to the limbs, and no torque is applied to the riser while pressing your bow. Built for power and precision, this bow press is engineered with reinforced materials to handle the demands of today’s highest-poundage crossbows and narrow compounds. From heavy-duty limbs to aggressive cam systems, it delivers uncompromising strength, stability, and safety during every press. Whether you’re tuning or repairing, this press is your go-to solution for high-performance bow tuning.

Presses crossbows as narrow as 4″ axle-to-axle with the MINI Xbow Adapter add-on accessory.

Lead Time: 3 week(s)

Features

What's Included

Compatibility

A properly tuned setup is the key to success in the field, and that means every component. At LCA, we engineer the most precise, reliable, and advanced tuning tools in the industry, so you’re always ready when it counts. The Power Green Crossbow Press exemplifies this commitment, and we continue to advance our designs to stay current with bow technology.

American Made

The Power Green Crossbow Press is proudly manufactured in our facility located in the state of Georgia, USA.

Hand-Assembled Craftsmanship

Each Power Green Crossbow Press is built by real hands, with real pride. Our hand-assembled process guarantees unmatched attention to detail and quality.

Robotic Precision Welded

Every weld on the Power Green Crossbow Press is executed with robotic precision, ensuring unmatched consistency, strength, and a flawless finish every single time.

Patent Protected

Patents, built on originality, back each Power Green Crossbow Press. Our products lead the industry with unique solutions you can trust.

Power Green – Motorized Crossbow Press (Thumb-Toggle Motor)

Package Contents

Power Green Press main assembly with motor mount
Motor assembly with pre-wired thumb-toggle control
Four adjustable press fingers
One draw-stop finger
Four lag bolts with washers

Important Notes

Press must be securely mounted before operation
Never operate the press unmounted
Do not plug in the motor until installation is complete
Use only a grounded GFCI outlet

Tools Required

No tools needed for normal use
Optional wrench for lag bolts
Optional heavy-duty C-clamps for temporary mounting

Pre-Installation Checklist

Mounting surface must be sturdy and level
All clamps or bolts must be tightened securely
Press must not rock, move, or shift
Motor must be aligned in the drive slot
Thumb-toggle switch must be in the OFF position

Mounting the Power Green Crossbow Press

Mount press to a solid workbench using the supplied lag bolts
Mount press to the LCA Floor Stand following stand assembly steps
Use heavy-duty C-clamps for temporary setups
Check clamp tightness before each use
Never operate the press unless fully secured

Motor Installation (Thumb-Toggle Motor)

Keep the motor unplugged during installation
Ensure the toggle is turned off
Align the arrow on the motor with the arrow on the press spindle
Slide the motor shaft fully into the T-slot
Tighten the rear mounting bolt until snug
Route the toggle cable away from moving components
Mount the toggle within comfortable reach
Plug into a grounded GFCI outlet once secured
Pulse the motor briefly with no bow installed to verify smooth travel
If binding occurs, unplug immediately and correct alignment

Installing & Adjusting Press Fingers

Press the spring-steel tab on each finger block and slide the finger onto the rail
Position each finger to match your crossbow’s limb-tip profile
Use the rear thumb screws for fine adjustment
Ensure all fingers make even, flush contact with the limb tips
Avoid twist or side-load
Mark finger locations for commonly serviced crossbows

Placing the Crossbow in the Press

Open the press with short motor pulses until adequate clearance is available
Center the crossbow so the limb tips rest on the fingers, never on the riser
Use the MINI Xbow Adapter for narrow or reverse-limb models
Standard-limb crossbows: place stock facing upward
Reverse-limb crossbows: place stock facing downward
Adjust each finger for even limb-tip contact
Ensure all cables, cams, accessories, and foot stirrups are clear of the press frame

Pressing the Crossbow (Thumb-Toggle Operation)

Keep hands and tools clear of all limbs
Wear safety glasses during operation
Use short, controlled pulses to compress limbs evenly
Stop pressing once strings and cables become slack
Perform string or cable changes and timing adjustments as needed
Never remove cams while the limbs are under pressure
Reverse the toggle slowly when finished to release pressure smoothly
Always monitor limb alignment throughout the process

Emergency & Safe Stopping

Release the toggle immediately to stop movement
Unplug the press if the motor fails to stop
If the press binds, reverse movement slightly, stop, unplug, and correct alignment

Maintenance & Storage

Wipe down the press after each use
Check all bolts, finger blocks, and thumb screws regularly
Inspect welds and hardware for wear or damage
Store indoors in a dry, clean environment
Keep moisture and debris away from the motor assembly

Troubleshooting

No power/power supply issue: Check the plug, power supply box, toggle wiring, and outlet.
Finger misalignment or debris: Stop the motor, realign the fingers, and clear any debris.
Motor will not run: Verify the plug, outlet, power supply light stays bright when operating press.
Uneven finger setup: Re-check finger spacing and thumb-screw settings.
Press binds: Contact LCA
Uneven limb compression: Adjust finger spacing and thumb-screw settings.
Vibration or excess noise: Tighten mounting bolts and verify all hardware or need lubrication.

Safety Summary

Always bolt or clamp the press securely before use
Adjust finger spacing and alignment before applying pressure
Do not exceed rated limb weight or travel limits
Always wear safety glasses
Release limb tension slowly and evenly
Never leave a crossbow under pressure or unattended