Draw Stop Finger
$25.00
This product is our bow press Draw Stop Finger. When you purchased your bow press, it would have included one of these Draw Stop Fingers, but for specific bow models, you might need a Draw Stop Finger for both ends of your press to clear dual draw stops.
This specific finger design is intended for bows with draw stops that might touch or contact standard press fingers. The standard finger cannot be used in these cases unless the draw stop is removed. However, removing a draw stop poses the risk of forgetting to reinstall it after working on the bow. By replacing the standard finger with the Draw Stop Finger, you can safely press any bow with a draw stop without the need to remove it.
Lead Time: 1 week(s)
- Eliminates the need to remove most draw stops
- Designed to clear draw stops safely on most bows
- Ideal for specific bow models with dual draw stops
- Safe, compatible, and easy to install
- 1 qty. Draw Stop Finger
- The Draw Stop Finger can be used on all LCA press models. Some bow models on the market, such as Elite bows, feature dual draw stops. Most of these bow models would require two Draw Stop Fingers to press them safely without removing the stops. Consult with your bow manufacturer before pressing for confirmation.
We don’t follow trends—we set them. At LCA, we create cutting-edge tools and technologies that raise the bar for what’s possible in tuning and precision archery. Through innovation and design, we continually evolve to provide you with a competitive edge and a superior experience at the bench and in the field.
Archery Innovation
Innovation isn't just part of what we do—it defines it. We're redefining the standard for precision in modern archery. This is shown in the design of the Draw Stop Finger and its intended function.
Designed with End-Use in Mind
The Draw Stop Finger is built around the end-user experience. We don’t just design for looks—we design for function, durability, and ease-of-use in real-world applications.
Trusted by professionals
Professional hunters and tournament archers worldwide trust LCA products to help create their most accurate setups. The Draw Stop Finger is one of those products!
Product Support
Questions? We've got answers. Our product support team is ready to help with guides, tips, and real solutions. If you need assistance with your Draw Stop Finger, please don't hesitate to contact our team.
1. Product Overview
The Draw Stop Finger is a specialized attachment included with every Last Chance Archery bow press. Its purpose is to allow safe pressing of bows with large or protruding draw stops, without requiring the removal of the stops themselves.
-
Included: Each LCA bow press ships with one draw stop finger.
-
Optional: Some bows (e.g., Elite and certain Athens models) require two draw stop fingers. A spare can be purchased from the LCA website or through authorized distributors.
2. When to Use the Draw Stop Finger
Some bows—such as select Athens, Obsession, and Elite models—have draw stops positioned on the cams in such a way that standard curved fingers interfere when pressing.
In these cases, the shorter, flat draw stop finger should replace the curved finger on that side of the press. The bow’s draw stop will then sit directly above the flat finger, allowing the bow to be pressed safely.
3. Installation Instructions
-
Identify Draw Stop Location
-
Examine your bow.
-
If the draw stop contacts a curved finger when pressing, replace with a draw stop finger.
-
-
Remove Curved Fingers
-
On the side(s) where draw stops interfere, remove the curved fingers.
-
-
Install Draw Stop Fingers
-
Slide the draw stop finger(s) onto the dowel pins as you would with standard fingers.
-
-
Set Finger Width
-
Adjust fingers to match limb spacing.
-
For single-limb bows, place fingers as close together as possible.
-
4. Pressing the Bow
-
Place the bow into the press.
-
Curved fingers will hold one side of the limbs.
-
Flat draw stop fingers will sit just under the draw stop(s).
-
-
Begin pressing slowly until the bow is held under light pressure.
-
Adjust thumb screws on the back of the fingers.
-
Ensures limbs press evenly.
-
Prevents riser torque or uneven limb pressure.
-
-
Continue pressing as needed for service or maintenance.
Videos
Draw Stop Finger + Instructional
Join LCA’s Jonathan Clark as he demonstrates how to set up and use the LCA Draw Stop Finger.
BUY NOW: https://lastchancearchery.com/shop-1/draw-stop-finger
Additional information
| Weight | 0.1875 lbs |
|---|---|
| Dimensions | 5.5 × 2 × 0.5 in |
| Product Lead Time (Wks) | 1 |
1 review for Draw Stop Finger
- Custom shape for a specific fit
Additional information
| Weight | 0.1875 lbs |
|---|---|
| Dimensions | 5.5 × 2 × 0.5 in |
| Product Lead Time (Wks) | 1 |
1 review for Draw Stop Finger
-
Awesome
Although my press came with one, my Obsession bow requires 2. They function great without having to remove the draw stop’s.
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
Precision Arrow Prep Kit - Handheld
Precision Arrow Prep Kit - Bench Mount
ReachIt Wrench
Ready Blade
Edward Dudek –
Awesome
Although my press came with one, my Obsession bow requires 2. They function great without having to remove the draw stop’s.