(Original Grey) Tungsten Stabilizer Weight (3 oz) 1/4-20 Size
$20.00
Would you like to reduce your stabilizer weight stack by nearly two-thirds? With LCA Tungsten stabilizer weights, you can achieve just that! These weights are the same size as a standard 1 oz stainless steel weight, but when you weigh them, they impressively weigh 3 oz each.
Using these weights allows you to shorten the overall length of your weight stack, reducing wind drag and preventing the weights from hitting your side. This system achieves a higher weight in a more compact form, making it ideal for shooters with maximum stabilizer length restrictions in their class.
The LCA Tungsten weights are non-threaded, allowing them to slide easily onto your stud. They won’t stick together, and you can use our original design to support up to 34 oz of weight with a single 3” stud, eliminating the need for multiple threaded studs. LCA Tungsten is unparalleled in quality.
Please note that the weights are non-threaded, so a weight cap and stud are required. You can also use your rubber stabilizer dampener as a cap on your front or sidebar to secure your weight onto your threaded stud.
Lead Time: 1 week(s)
- Grey exterior surface with mirror finishes on either side of each weight
- Small and dense design
- Reduces your weight stack by nearly two-thirds
- Better center of gravity for your weight
- A shorter weight stack provides less wind drag. The non-threaded design allows for easy slide-on application, and one stud can accommodate up to 34 oz of weight without needing multiple studs.
- 1 qty. Grey LCA Tungsten (3 oz)
This Tungsten Weight features our ORIGINAL WEIGHT DESIGN and is not part of our new LCA Black Tungsten line. This specific weight is compatible with a 1/4-20 thread size, which is commonly used by stabilizers such as Doinker, Cartel, and Dead Center, among others.
Fits any stabilizer threaded stud that is ¼-20
LCA Stabilizer Weights are second to none. Featuring a non-threaded design, you can easily interchange your weights without hassle. Choose your cap and stud, slide on the weight, install it onto your stabilizers, and you’re ready to go. Cutting your weight stack by 2/3 in overall length has many advantages that help increase your accuracy in the field. Mix and match between LCA 3 oz Tungsten, 1 oz Stainless Steel, and 0.5 oz Stainless Steel for peak performance.
Archery Innovation
Innovation isn't just part of what we do—it defines it. We're redefining the standard for precision in modern archery.
Trust by professionals
Professional hunters and tournament archers worldwide trust LCA products to help create their most accurate setups.
Built for Performance
This product is designed to perform at a high level. When everything comes down to that one shot, you don’t want your equipment to be the weak point. Purchasing the correct tuning tools can help maximize your setup.
Product Support
Questions? We've got answers. Our product support team is ready to help with guides, tips, and real solutions.
(Original Grey) Tungsten Stabilizer Weight (3 oz) – 1/4-20
Installation & Use Instructions
Ensure your stabilizer uses a 1/4-20 threaded stud.
Slide the tungsten weight onto the stabilizer stud.
(The weight is non-threaded and designed to slide freely.)
Stack additional weights if desired.
Install a weight cap, rubber dampener, or retaining nut to secure the weight stack.
Thread the stabilizer or stud assembly onto your bow.
Tighten until secure and properly aligned.
Check that the weights are fully seated and cannot move freely before shooting.
Adjust the number of weights as needed to achieve your preferred balance and hold stability.
Additional information
| Weight | 0.1875 lbs |
|---|---|
| Dimensions | 5.5 × 3.25 × 0.5 in |
| Product Lead Time (Wks) | 1 |
- Weight: 3 oz
- Thread Fit: ¼-20
- Diameter: 1.40″
- Color: Grey/Mirror Finish
- Material: Tungsten
- Each weight is non-threaded.
Additional information
| Weight | 0.1875 lbs |
|---|---|
| Dimensions | 5.5 × 3.25 × 0.5 in |
| Product Lead Time (Wks) | 1 |
- Warranty Period
- 30 Days
- Coverage
- Manufacturing Defects Only
Reviews
There are no reviews yet.
You may also like…
Related Products
Universal Tuning Gauge
Arrow Wraps - Solid Series
Arrow Wraps - Tactical Series
Arrow Wraps - Ignite Series
0.5 oz Stabilizer Weight (1/4-20 Thread Fit)
3 oz Tungsten Stabilizer Weight - (1/4-20 Thread Fit)
(1/4") Cap + Stud Packs
ReachIt Wrench
Pocket Shop
Ready Blade
Precision Arrow Prep Kit - Handheld
Reviews
There are no reviews yet.